| Batts De-Icer Pro 5000-75 For Runway Anti-icing and De-icing |
De-Icer / Flusher Pro 5000-75
|
De-Icer / Flusher Pro 5000-75
|
|
| The De-Icer Pro 5000-75 unit is equipped with hydraulic power that controls the booms, product pumping system, and spray nozzle functions. The truck engine powers the hydraulics by a front drive PTO or through a transmission driven PTO. Hydraulic power is available anytime the engine is running. The Batts De-Icer Pro 5000-75 is a 5,000-gallon (18.93 m3) system that sprays a 50 ft. (15 m) swath and a 75 ft. (22.8 m) swath. |
| The computer controlled product pump on the Batts De-Icer Pro 5000 provides accurate application rates regardless of the vehicle speed. The control system senses the speed, active spray width, and material flow rate. To maintain the desired application rate, the computer automatically increases or decreases the flow rate to compensate for changes in speed or spray width. Application rate settings, operation of booms, and nozzle controls are all at the operator's fingertips and are lighted for nighttime work. |
| The spray boom is designed in three sections. A center section sprays a 10 ft. (3 m) swath. Left and right booms each spray a total of 32.5 feet (9.9 m). The booms are folded in and out and latched in place from inside the cab by hydraulic controls. Break-Backs prevent damage by swinging the booms away, in either direction, if the operator strikes an object while spraying. Spray nozzles on each section of the spray booms can be operated individually, left, center, right, or in any combination desired. |
| The unit is tested, disassembled completely, then cleaned and painted with high gloss acrylic urethane paint. The vehicle is reassembled and thoroughly tested to insure all components are working properly. |
De-Icer / Flusher Pro 5000-75
|
Available Options
|
Flusher
GPS Application Control
Hose Reel, High Volume / Low Pressure
Hose Reel, Low Volume / High Pressure
Water Heater
Multiple Nozzle System
Pencil Stream Nozzle System
Plow
|
|
| De-Icer Pro 5000-75 Truck Specifications |
| (Suggested Minimum Requirement) |
| The unit can be mounted on any chassis meeting the following specifications. |
Make, Model, Color – Customer Choice
|
Chassis, Frame - Heavy-duty
|
86,000 lbs. (39,000 kg) GVW Vehicle *
|
|
|
Engine / Drive Train Group
|
|
|
|
|
|
|
|
|
Transmission Allison MD 4560 P
|
Axles & Wheels
|
|
|
25,000 lbs. (11,340 kg) *
|
|
|
|
|
58,000 lbs. (26,300 kg) Rear Tandem Axle
|
|
|
|
|
Air Brakes
|
Air Dryer
|
* Heavier with Plow Option
|
|
|